Before calling
- Join a Caucasus mission on a host running ATLAS 4.31 or later. Ask the host whether the instance is in Full Sim, also labelled Realistic airspaces. This guide follows that mode.
- Spawn parked, power the aircraft’s radios and connect SRS to the server. Select AM and make sure your push-to-talk transmits on the tuned radio.
- Find the departure field in the Full Sim frequency directory. Start on Clearance Delivery if it has a separate channel. At Kutaisi, Ground, Tower and Clearance share 125.500 AM. Kutaisi ATIS is 119.950 AM. Your host’s frequency plan takes priority.
- Use the callsign ATLAS recognizes for your slot. Substitute it for Viper one one in the examples.
Request and read back your clearance
Request IFR with your destination.
PilotKutaisi Ground, Viper one one, request IFR to Batumi.
ATLAS checks for a usable published route. If one is unavailable, it can plan a route for the current runways and screen it against DCS terrain.
Wait for the clearance to be ready.
ATLAS may say “IFR request received. Checking route terrain. Stand by for clearance availability.” Stay on frequency. When the controller advises that the clearance is available or says “Advise ready to copy,” reply “Viper one one, ready to copy.”
Copy and read back what you were assigned.
Include the destination, route and fixes in order, runway, initial altitude or flight level, departure frequency and squawk, plus any other items the controller requests. Use the numbers and fixes from your transmission.
Readback example from a 4.31 replay
PilotCleared IFR to Batumi via FAP, then TUZZA, runway zero seven, maintain ten thousand five hundred feet, departure one two seven decimal one, squawk four two zero one, Viper one one.
Wind, runway, aircraft and route availability can change the clearance. Keep any instruction to maintain visual terrain clearance.
Wait for “Readback correct.”
Then contact the assigned Ground position for taxi. At Kutaisi that may mean staying on 125.500 AM and addressing Ground on the next call.
When will I hear a SID or STAR?
ATLAS names the procedures it assigns. For example, one published Kutaisi-to-Batumi route uses the KUSSA One Delta departure and SARPI One arrival. A clearance that gives direct fixes assigns those fixes. The arrival controller issues the approach instructions later.
From taxi to arrival
- Request taxi and read back the route, assigned runway and any hold-short instructions. Get explicit crossing clearance before crossing any runway. Request takeoff from Tower when holding short and ready.
- After takeoff, follow the issued departure and contact Departure when instructed. Check in with your callsign and altitude. Use the controller and frequency assigned for each handoff, including any enroute sector.
- Follow the arrival or approach that ATLAS assigns for the active runway. If the runway changes, copy the revised instructions before continuing. Switch to Tower when told and read back the landing clearance.
- After landing, vacate as instructed. When clear, contact Ground for parking.
Basic voice ATC works through SRS. Pilots who want to try cockpit waypoint loading can use the separate Radio waypoint preview setup for supported aircraft.
If you’re stuck
- Ground sends you to Clearance.
- Tune the assigned channel and make the same plain IFR request to Clearance.
- You missed part of the clearance.
- Ask the current controller to say again. Read back the complete assignment once you have it.
- ATLAS asks you to repeat a fix.
- Spell it phonetically and read back the full clearance. For example, SB200 is “Sierra Bravo two zero zero” and KUSSA is “Kilo Uniform Sierra Sierra Alfa.”
- ATLAS is waiting for wind or terrain.
- Stay parked and on frequency while it checks. An acknowledgement or a standby call leaves your IFR request pending.
- ATLAS gives no reply.
- Verify your AM frequency, selected SRS radio and microphone with a radio check. Ask the host to confirm the release, instance mode and DCS telemetry if the radio check also goes unanswered.
Use the Full Sim frequency directory for airport channels, or the DCS and SRS setup guide for installation help.
For simulation use in DCS World.